Infrared bridge trimming machine manufacturers share the function of stone marking

2020-05-14

　　 Infrared bridge trimming machine manufacturer Guanyuan machinery to share with you about the role of stone marking:
　　
In the processing of stone products, it is often necessary to mark the products. The purpose of marking is to prevent over cutting in the process of processing. Marking work is a processing technology foundation in the process of stone products processing, and it is also a very important process criterion, which is very important and can not be ignored.
　　
The functions of marking products are as follows: 1
　　
(1) prevent over cutting during processing
The purpose of drawing lines at the end face during line profiling is to facilitate the production and processing personnel to observe whether the cutter has overcut phenomenon and whether the cutter has cut the contour line of the line, causing damage to the line contour and affecting the product quality. It is very important to prevent over cutting in the processing of stone products.
　　
(2) easy to observe and monitor in the process of product processing
During the processing of stone products, with the transverse movement of the cutter and the ups and downs of the cutting tool, the running track of the cutting tool is constantly changing. In order to control whether the tool will be over cut in the running process, drawing lines on the surface of the products to be processed can be used to observe and monitor whether the surface to be processed will be overcut.
　　
(3) find the key line, point and surface in the process of machining
Some special stone products are difficult to find the processing key line, point and surface, such as the processing of rotary stairs, through the marking to find the processing key line, point, surface, so as to ensure the smooth processing of products.
　　
(4) determine the datum line and datum point
The processing of stone products is the same as the processing of mechanical products, and the datum line and datum point are taken as reference processing. The product datum line and datum point can be determined by marking, so as to ensure that the product is processed with datum line and datum point.
　　
(5) find the center line and center point
In the processing of solid cylinder and pyramid products, the center point or center line position can be found by drawing lines, so as to prevent the products from being scrapped due to eccentricity and off-line in the process of product processing.
　　
That's it Infrared bridge trimming machine manufacturer Share the relevant information about the role of stone marking, more details can be concerned（ jpmalaso.com ）Jinjiang Guanyuan Machinery Co., Ltd.

泛亚电竞维护

Infrared bridge trimming machine manufacturers share the function of stone marking